Product Description
Philips HeartStart Onsite Adult AED Pads Cartridge M5071A
• These Philips Adult AED pads are designed for the Philips HeartStart Onsite AED unit.
• The cartridge contains 2 adhesive electrode pads that are placed on the patients bare skin as illustrated on the cartridge.
• Pads have a two year shelf life and should be replaced prior to their expiration.
Installing Your Smart Pads Replacement
When you receive your Philips Replacement Pads simply remove the old pads and insert the new cartridge into the cartridge well on the front side of the Onsite. The green PULL handle should be all the way down. See Illustration below.
1. Remove the new pads cartridge from its package.

2. Locate the latch at the top edge of the OnSite, and slide it to the side.The pads cartridge will be released. Remove the old cartridge.
3. Install the new cartridge: slide the bottom end of the cartridge into the recess, then press in the cartridge until the latch clicks into place. Be sure the green handle is pressed down firmly. The OnSite will tell you that pads have been inserted, then it will turn off to be ready for use.
Note: Do not open the pads hard cover or film seal until you need to use the pads. If the pads have been opened replace them immediately to prevent the adhesive gel from
Additional Information
| Manufacturer | Philips |
|---|---|
| Model | Philips HeartStart |
| Item # | M5071A |
| Training | No |








